Bamar standard cylinders are manufactured with high quality materials. Rods are made from polished stainless steel type AISI 316. Tube, fork and cap are all machined from hardcote anodized aluminium. Upon demand we may supply special lengths and custom cylinders for any application.
Cylinders are single acting and are equipped with a pressure rod release. This pressure is charged through the “pneumatic” valve located on the cylinder body, opposite to the rod. Gas pressure should be regulated depending on the release speed you wish.
Pressure is charged at 100 psi (7.0 bar) approximately. Max pressure 350 bar (5000 PSI). Upon demand, all cylinders may be manufactured with double acting function (push-pull).
Cylinder accessories
Bamar offers a wide range of cylinder terminals, for many different uses:
- stainless steel adjustable fork – it allows a minimum length adjustment.
- eye-fork toggle – it is used on the lower part of the cylinder in order to prevent lateral loads.
- Upon demand, we may supply fork-fork toggles and eye terminals.
Bamar standard cylinders are manufactured with high quality materials. Rods are made from polished stainless steel type AISI 316. Tube, fork and cap are all machined from hardcote anodized aluminium. Upon demand we may supply special lengths and custom cylinders for any application.
Cylinders are single acting and are equipped with a pressure rod release. This pressure is charged through the “pneumatic” valve located on the cylinder body, opposite to the rod. Gas pressure should be regulated depending on the release speed you wish.
Pressure is charged at 100 psi (7.0 bar) approximately. Max pressure 350 bar (5000 PSI). Upon demand, all cylinders may be manufactured with double acting function (push-pull).
Cylinder accessories
Bamar offers a wide range of cylinder terminals, for many different uses:
- stainless steel adjustable fork – it allows a minimum length adjustment.
- eye-fork toggle – it is used on the lower part of the cylinder in order to prevent lateral loads.
- Upon demand, we may supply fork-fork toggles and eye terminals.
Cylinder
Hydraulic
Easy installation
Low maintenance
Made in Italy
| ROD | 1x19 Wire Ø mm | Working load max* kg | Body Ø G mm | Thread F mm | All Closed A ** mm | All Open B ** mm | Stroke C mm | Stroke size (***) | GAP D mm | Pin Ø E mm |
|---|---|---|---|---|---|---|---|---|---|---|
| -10 | 7 | 2.749 | 60 | 12,7 | 505 | 725 | 220 | S | 13 | 12,7 |
| -10 | 7 | 2.749 | 60 | 12,7 | 620 | 950 | 330 | L | 13 | 12,7 |
| -10 | 7 | 2.749 | 60 | 12,7 | 800 | 1.300 | 500 | F | 13 | 12,7 |
| -12 | 8 | 3.508 | 60 | 15,9 | 545 | 790 | 245 | S | 16 | 15,9 |
| -12 | 8 | 3.508 | 60 | 15,9 | 665 | 1.015 | 350 | L | 16 | 15,9 |
| -12 | 8 | 3.508 | 60 | 15,9 | 930 | 1.530 | 600 | F | 16 | 15,9 |
| -17 | 10 | 4.696 | 65 | 15,9 | 550 | 780 | 230 | S | 16 | 15,9 |
| -17 | 10 | 4.696 | 65 | 15,9 | 690 | 1.040 | 350 | L | 16 | 15,9 |
| -17 | 10 | 4.696 | 65 | 15,9 | 1.110 | 1.860 | 750 | F | 16 | 15,9 |
| -22 | 12 | 5.566 | 70 | 19 | 610 | 840 | 230 | S | 19 | 19 |
| -22 | 12 | 5.566 | 70 | 19 | 760 | 1.120 | 360 | L | 19 | 19 |
| -22 | 12 | 5.566 | 70 | 19 | 1.280 | 2.150 | 870 | F | 19 | 19 |
| -30 | 14 | 9.939 | 85 | 22 | 700 | 950 | 250 | S | 22 | 22,2 |
| -30 | 14 | 9.939 | 85 | 22 | 860 | 1.255 | 395 | L | 22 | 22,2 |
| -30 | 14 | 9.939 | 85 | 22 | 1.465 | 2.450 | 985 | F | 22 | 22,2 |
| -40 | 16 | 15.185 | 100 | 25,4 | 760 | 1.030 | 270 | S | 26 | 25,4 |
| -40 | 16 | 15.185 | 100 | 25,4 | 890 | 1.365 | 420 | L | 26 | 25,4 |
| -40 | 16 | 15.185 | 100 | 25,4 | 1.645 | 2.750 | 1105 | F | 26 | 25,4 |
| -60 | 22 | 18.981 | 120 | 31,8 | 905 | 1.185 | 280 | S | 32 | 31,8 |
| -60 | 22 | 18.981 | 120 | 31,8 | 1.110 | 1.565 | 455 | L | 32 | 31,8 |
| -90 | 26 | 24.227 | 140 | 31,8 | 1.000 | 1.325 | 325 | S | 38 | 34,6 |
| -90 | 26 | 24.227 | 140 | 31,8 | 1.200 | 1.730 | 530 | L | 38 | 34,6 |
| -150 | 32 | 41.069 | 180 | 38,1 | 1.091 | 1.520 | 375 | S | 45 | 44,5 |
| -150 | 32 | 41.069 | 180 | 38,1 | 1.316 | 1.975 | 600 | L | 45 | 44,5 |
* Atm 5000 PSI (Approx 345 bar)
** Length from rod thread end to pin centre on cylinder.
*** S = Standard stroke
L = Long stroke
F = Flattener stroke
| ROD # | Fork Stroke mm | C mm | D mm | E mm | Pin Ø F mm | G mm | H mm | I mm |
|---|---|---|---|---|---|---|---|---|
| -10 | 30 | 30 | 68 | 13 | 12,7 | 20 | 47 | 32 |
| -12 | 31 | 36,5 | 70 | 16 | 15,9 | 23 | 52 | 38 |
| -17 | 31 | 36,5 | 70 | 16 | 15,9 | 23 | 52 | 38 |
| -22 | 35 | 38 | 82 | 19 | 19 | 27 | 62 | 45 |
| -30 | 38 | 38 | 103 | 22 | 22,2 | 32 | 70 | 51 |
| -40 | 40 | 40 | 111 | 26 | 25,4 | 35 | 75 | 57 |
| -60 | 55 | 75 | 154 | 32 | 31,8 | 44 | 105 | 71 |
| -90 | 55 | 71 | 154 | 35 | 34,6 | 53 | 110 | 83 |
| -150 | 70 | 80 | 220 | 45 | 44,5 | - | - | - |
| File | Action |
|---|---|
| Instruction manual hydraulic cylinder | Download |
Bamar may guarantee a 360° service, starting from a simple request made by the client, to end up with the final product.